A safe, and effective water spot & mineral remover in an easy spray & wipe formulation.

 CARPRO Spotless 2.0 uses an upgraded chemical formula with stronger acids to break down the mineral deposits on the surface before they can etch into the finish, thus negating the need for time consuming polishing, prolonging the life of the paint film. If left unattended, water spotting can cause permanent damage to the most resilient of vehicle surfaces, including automotive clearcoat, brightwork trim, and glass!

Even the best protective ceramic sealants are not fully impervious and can benefit from periodic chemical water-spot removal to keep them at the peak of their functional and aesthetic performance. Spotless’s proprietary blend of carefully balanced gentle acids safely removes heavy mineral deposits on most vehicle surfaces, and can even be used to help maintain our own CQUARTZ line of nanotechnology coatings.

If you are looking for a fast and efficient water-spot remover to dissolve unsightly bonded mineral contaminants from your car or motorcycle, CARPRO Spotless 2.0 is the solution.

Directions:

For Body Paint

1. Wash the vehicle with Reset, rinse and dry the paint.  Work indoors or in the shade on cools panels.

2. Prepare 2 damp microfiber towels.

3. Spray Spotless 2.0 directly onto the panel or into 1 damp Terry Weave Towel and spread on the affected area. 

4. Allow 30 seconds to 1 minute for Spotless 2.0 to breakdown the minerals on the surface before wiping the affected area to help loosen the mineral deposits.

5. Do not let the chemical dry on the surface, wipe off with a 2nd damp microfiber towel or apply Spotless 2.0 again.

6. Repeat if necessary.

7. After cleaning each panel, thoroughly rinse the panel with running water and dry before moving to the next panel.

Wheels and Emblems

1. Clean the area with Reset, rinse and dry the surface.

2. Always test in an inconspicuous area first.

3. Spray Spotless 2.0 onto an applicator, microfiber or brush of your choice and apply to affected area 1 section at a time.

4. Allow Spotless 2.0 to dwell on the affect area for 30 seconds to 1 minute without letting it dry before agitating to help break up the mineral deposits or stains.

5. Repeat if necessary.

6. Rinse thoroughly with running water after cleaning each area and dry.

Textured Plastics

1. Clean the plastics with Reset, rinse and dry.

2. Spray Spotless 2.0 directly on the the textured plastic or apply to a damp microfiber towel and wipe it onto the surface generously to allow it to get into the pores.

3. Allow Spotless 2.0 30 seconds to 1 minute to break down the mineral deposits and contamination before using a detailing brush to agitate and work the contamination out of the pores.

4. Repeat if necessary.

5. Rinse thoroughly with running water after clean each section and dry.

For Glass

1. Apply Spotless 2.0 onto a microfiber towel and spread on glass allowing to dwell for 30 seconds to 1 minute.

2. Use the same Microfiber towel to polish the glass to agitate the minerals or for stubborn water spots apply some Spotless 2.0 to a polishing pad and polish the glass by machine or by hand.

3. After spot removal thoroughly rinse the glass and adjacent panels with running water or wash with car shampoo and dry.

PRECAUTIONS:

1. Do NOT use in sun.
2. Do NOT use on hot surface.
3. Do NOT spray directly on glass. Use with caution, buff in and off instantly and neutralize.
4. Wear disposable gloves while working to avoid possible skin irritation.
5. Test in an inconspicuous area of any new material before using elsewhere.
6. Do not ingest.
7. Do not inhale.
8. Keep out of reach of children.
9. Do not spray in eyes, wear eye protection to be safe.
10. May affect windscreen/window coatings and traditional sealants and waxes.